Rear brake drags after tire replacement

Manfred said:
Sucked the air out through the rear caliper, added fluid to the rear master cylinder to keep it from sucking air. Have a firm brake peddle (and front brake). The read pistons are still not retracting, causing a serious drag on the disc. I also cleaned the caliper retaining pin.
Click to expand...
Wow, those rear pads are seriously worn down... leaving the pistons exposed...
 
Cleaned the pad retaining pin and the caliper pins then put a light coat of silicone grease on them and reassembled. All is good now! Thank you to all who commented.
 
You must log in or register to reply here.
Back
Top Bottom