24k mile service?

Joined
Aug 4, 2023
Messages
87
Location
Topeka, KS
Bike
2010 Silver NT700
I’ve crossed 24k. How urgent are items on the service list? Or how should I prioritize them?

I see people here have increased their service intervals.

I don’t have a service manual yet.

3rd owner, 2nd hardly rode it. I’ve done about 7000 since I purchased it. Checked spark plugs at 20k, oil change at 20, two new tires, and replaced the brake switch near the right grip. Also adjusted the clutch cable twice.

Maybe looking at selling and trying something new, too.
 
If you haven't checked the valves yet, it would probably be worth a peek at them.
This and chain guide/spanner wear... (new cover gaskets and grommets)
Air filter...
Change fork oil (possibly replacing bushings & seals while at it)...
Inspect head bearings...
Inspect wheel bearings & seals...
hub dampers & aluminum inserts + O-rings & Moly on drive spline (should be done at any tire change or occasion the rear wheel comes out)...
Inspect rear shock mounts and oil level in preload adjuster...
Inspect, clean & lube the handlebar switch-pod...
Smoothness and adjustment of throttle cables...
Replace engine coolant, inspect all hoses, lines, radiator cap, function of fan-stat, bearings of fan motor...
Conditions of brake calipers/pistons, float pins, pads, rotors, replace brake fluid with serious flush to clean crap out the ABS unit...
 
Back
Top Bottom