2010 NT700V Windshield

Mark Palmer · Friday at 8:48 AM

I'm still going thru my newly acquired NT, pleased so far with what I bought. The windshield needed replacing, so I bought (ebay) a new one which apparently shipped from Poland. It appears to be a factory unit or a faithful reproduction, but it says "Deauville" on it and the holes do not quite line up with the mounting bolts.

My question here is the "Deauville" windshield correct for the NT700V? Side-to-side measurements are about 5/16" to 3/8" greater on the windshield than the bolt holes. I am wondering if it is standard or acceptable mounting procedure to flex the windshield a bit to make it line up. The vertical holes line up correctly it seems.

Fieroguy · Friday at 9:54 AM

I'm wondering if that is a windshield for the older, 650cc, European model. I have never seen one with the vent for the NT700. From my experience, the bolt holes should line up and even be slightly oversized to allow for flex and to avoid cracking.

Mark Palmer · Friday at 9:56 AM

I think you are correct

Mark Palmer · Friday at 10:09 AM

Can anyone tell me where I can get a stock factory replacement windshield? Dennis Kirk, Partizilla neither have it.

dnktng · Friday at 12:53 PM

Part number. 64110-MEW-305

Looks like it's available at partzilla and others I checked.

I have my used OEM screen and it wasn't that good. Went thru several cee bailey screens and then a National Vstream. I would buy a Vstream again today.

Mark Palmer · Friday at 1:06 PM

I don't know how I missed that, thanks for the info. Is your original OEM in decent shape? Would you sell?

Mark Palmer · Friday at 1:07 PM

dnktng said:
Part number. 64110-MEW-305

Looks like it's available at partzilla and others I checked.

I have my used OEM screen and it wasn't that good. Went thru several cee bailey screens and then a National Vstream. I would buy a Vstream again today.

I don't know how I missed that, thanks for the info. Is your original OEM in decent shape? Would you sell?

Woodaddict · 2024-12-28T10:12:24-0600

I have after market from 7jurock.com it's taller and wider. So you can customize the size. Odd name website but it's works fine

mikesim · 2024-12-28T11:38:14-0600

Parts Fish in Omaha, NE is a Honda dealer who discounts their parts. I use them for all my OE requirements.

Mike

Mark Palmer · 2024-12-28T11:45:02-0600

mikesim said:
Parts Fish in Omaha, NE is a Honda dealer who discounts their parts. I use them for all my OE requirements.

Mike

Thanks.

2010 NT700V Windshield

Attachments